Heyco-Flex™ III Liquid Tight Fittings, 90° Sweep, NPT Hubs

///Heyco-Flex™ III Liquid Tight Fittings, 90° Sweep, NPT Hubs
Heyco-Flex™ III Liquid Tight Fittings, 90° Sweep, NPT Hubs2017-05-26T07:06:27+00:00

HeycoYellowLogo

For Flexible, Nonmetallic Liquid Tight Tubing

Open Product Spec Sheet

Heyco-Flex III Liquid Tight Fittings 90 Sweep NPT Hubs• For use with Heyco-Flex III Corrugated Tubing in trade sizes 3/8˝ through 1˝. See page 2-4.
• Nontoxic and UV resistant. • Rated for NEMA 4 and 4X applications when used with Heyco-Flex III Tubing.
• Rated for NEMA Type 3R applications.
• Easy, permanent assembly between the tubing and fittings: push the tubing over the fitting ferrule until the tubing “clicks” into place.
• Lightweight and lower installed cost.
• Quick and easy installation.
• Suitable for use in high vibration or flexing applications (automotive equipment, fiber optics, computer and peripherals, lab equipment, robotics, etc.).
• Resist salt water, weak acids, gasoline, alcohol, oil, grease, and common solvents. This feature is not assessed by UL certification or testing.
• For use in both wet and dry applications.
• If using a tapped hole, Teflon® tape is needed on the threads of the connector, for all other applications an O-ring and Locknut are needed to attain liquid tight.
• Use of an O-ring may be required for a complete liquid tight system with a non-threaded mounting hole.
• Patented.

Contact us today to order.  317.898.2511